If you have any queries we are still available to assist you during these uncertain times.
Slider

Knowledgebase

Step by step guides, videos tutorials and technical information

Slider

This section goes through configuring the recorder to connect to your wireless network using the Dictation Module. 

configuring the ds 9500 to use a wifi

  • Open the Dictation Module
  • Connect the DS-9500 recorder 
  • Click on Tools then click on Options and click on Device. 

Note: Device setting will not appear if the recorder isn’t connected. 

  • In the left column click on Wireless Network 
  • Select On to enable WiFi. 
  • Click Add and enter the following
    • Network name (SSID)
    • Security Type
    • Security Key. 
  • Click OK 

Repeat the same steps above if you want to add another wireless network to the device. You can register up to 10 wireless networks.

Optional: If you want the recorder to send the file when you press the New button, then tick the box “Prompt to send the dictation when the next dictation file is created”.

 Wireless Network

Now the recorder is configured to use your wireless network, so when you turn on the recorder the WiFi symbol will appear on the top of the recorder when its connected. The next step is to configure the recorder to download and/or email dictations. 

Get in touch!

 

Photo 0345 521 8588 UK
Photo 00 44 1582 483320 ROI
Photo 00800 7000 1000 EMEA

 

                       
Slider