Slide 1

Knowledgebase

Step by step guides, videos tutorials and technical information

RecMic Configuration Settings in Dictation Module

This article goes through the RecMic Configuration settings in the ODMS Dictation Module.

  • Open the Dictation Module
  • Connect the RecMic
  • Click on Tools and then Options
  • Click on the Device tab
  • Ensure the recorder is recognised by checking the relevant RecMic model is selected and the Model Name field should display the version and serial number.

 how to configure the recmic in dictation module 1

Customize Window

how to configure the recmic in dictation module 2

This allow you to change what the functions on the button does. Note the buttons in the image will highlight as you press the buttons on the recorder.

To change a function on a button follow the steps below.

  • Click on the function and select from the drop down list
  • Then click Apply and OK

how to configure the recmic in dictation module 3

Applies the user name to the recorder. Note this doesn't apply the Author ID to the recordings if you want to configure this then follow this guide here.

{slider Enable Button Click Suppression}

This makes the button click sound less susceptible to be picked up the microphone.

This will make the recorder produce a beep sound when a button or slide is operated. You can also set the volume of the beep sound.

This enables the track ball so you can use the mouse on the recorder. Note this function not available with the DR-2100.

This enables the left button to be remained pressed allowing you to drag the mouse with ease. You can set the time sensitivity of when the Click Lock will occur.

Application Control

how to configure the recmic in dictation module 4

The Application Control Window allows you to further configure the RecMic to control additional functions of the software.

To configure a button follow the steps below.

  • Click on the "..." button within the Assign field.
  • Select a Category from the drop down
    • Direct Recording
    • Playback Control
    • General (Launch or close the Dictation Module)
    • Voice Recognition (Real-Time Voice Recognition Editor Window)
    • Dragon User Commands (Use custom created Dragon User Commands)

how to configure the recmic in dictation module 5a

  • Select a Command

    how to configure the recmic in dictation module 5

  • Click OK

 

 

Contact Us Parralax
Get in Touch

Service:

Region Specific Numbers
enbghrcsdanlfifrkadeelhugaitjanofaplptruessvcy