Download dictations using the Ethernet cable

This article goes through how to setup your DS9500 recorder to download dictations to a network share using the Ethernet cable.

This is ideal if you don’t have access to a Wi-Fi connection or use the Olympus software to download. 

To do this you must configure the wireless download setting for the recorder first by following the guide Wireless Download Settings

download dictations using ethernet cable 1

  • Connect the Ethernet cable and the power adapter to the CR21 cradle
  • Make a recording then once you are finished, connect the recorder to the cradle
  • Press F3 to send
  • It will then prompt if you want to send the file press + or – button to select the Yes option and press OK/Menu to confirm

download dictations using ethernet cable 2 

  • The dictation will now be sent

Send multiple files

It is also possible to send multiple files by following the below steps.

  • Press the F1 button and this will open up a list.
  • Press the F3 button to send
  • Press + or – button to move up and down the list
  • Press OK/Menu button to tick the files you want to send.
  • Press F2 to execute the send.  

download dictations using ethernet cable 3

  • It will then prompt if you want to send the file press + or – button to select the Yes option and press OK/Menu to confirm.      

download dictations using ethernet cable 4

  • The dictations will now be sent.

To check the status of your files on the recorder you can follow the guide here

Copyright OM Digital Solutions. All Rights Reserved